Digital Media 900TL - Manual (Page 8)

If a MAU is being added to an existing
network, connect Ring In to the Ring
Out connector of a MAU or repeater, and
connect Ring Out to the Ring In
connector of a MAU or repeater.
Connect station cables. 4
Check LEDs. 6
With power on, verify that the Power and
Module OK LEDs are on.
Install a MAU to adjacent MAUs or repeaters.
5
Connect station cables to any available
lobe connector on the MAU. For
150-ohm applications, you also need an
impedence matching transformer cable
(Digital part number BN26T-03).
Installing a DEChub ONE MAU 900TL (continued)
8 DECmau 900TL
Module installation for a
DEChub ONE MAU 900TL
is complete.
LKG–8143-93I