Beisler 1265-5 - Manual (Page 106)

3.C ontactpressure ofthe auxiliary roller
The contactpressure ofthe auxiliary roller6 is decisive forthe
constantfabric guide along the stop 7.
The contactpressure has to be individually setaccording to the
m aterialto be processed.
– Feed the m aterialand startthe sew ing operation.
Ifthe m aterialis shifted aside from the stop 7 during the feed,the
contactpressure is too low .
Ifthe m aterialcurls up atthe stop 7,the contactpressure is too high.
Increasing the contactpressure
– Turn the setting screw 4 counter-clockw ise.
R educing the contactpressure
– Turn the setting screw 4 in clockw ise direction.
N ote
The pressure ofthe blow ing device 5 should notbe altered.
31
3
4
5
7
6