Beisler 739-23-1 Service Manual - Manual (Page 40)

4. Material clamps
4.1 Clamping force of the material clamps
Instruction and inspection
Depending on the thickness of the material, it might occur that the
material holder cannot or only barely be closed.
–
Insert thin material.
– Close material clamp.
– Check clamping force and closing pressure.
– Insert thick material.
– Close material clamp.
– Check clamping force and closing pressure.
Adjustment
–
Loosen screws 1.
– Adjust angle 2.
– Tighten screws 1.
3-40
1 2