Bematech KF-6580 - Manual (Page 7)

KF-6580 · Revision 1.2
7
Characteristics Specifications
Printing Method: Thermal Line Printing
Dot Density: 8 dots/mm (203 dpi x 203 dpi)
Print Width: 48 mm (1.89”) (384 dots/line)
Print Speed: 50 mm/s (2”/s) (text mode)
Characters per line: 16, 21, 32, 42
Character Set: Alphanumeric Code Page 850, Code Page 860 and
Code Page 437
Features Modular, flexible and lightweight design
Automatic cutter (full cut)
Presenter with retractable function
Low paper sensor (Paper Near End)
Automatic paper loading
Downloadable firmware – update your printer software on site.
Supported Barcodes:
UPC-A, UPC-E, EAN-13, EAN-8, CODE 39, ITF,
CODABAR, CODE 93, CODE 128, ISBN, MSI,
PLESSEY, PDF-417
Communication Buffer Capacity: 32 Kbytes
Interface: Parallel (Unidirectional) and Serial (RS-232) or USB (1.1)
Serial Interface Baud rate: 9600 or 19200
Specification Start bit: 1 bit
Data bits: 7 or 8 bits
Parity bit: Odd / Even or No parity
Stop bit: One or two bits
Power requirements Voltage: 12 VDC ± 10 %
Current: 2.5 A (5A load, 1s max.)
Environment Operating temperature: 0 to +40ºC (32 to 122°F)
Guaranteed print quality: 5 to 40°C (41 to 104°C)
Storage temperature: -20 to 60ºC (-4 to 140°F) (except for paper)
Operating humidity: 35 to 80% RH, non condensing
Storage humidity: 5 to 95% RH, non condensing (except for paper)
Reliability Print head service life: 50 Km, fifty million pulses
Cutter lifetime: 300.000 cuts
Media Type: Single-ply thermal paper roll
Width: 57.0~58.0 mm (2.24~ 2.28 in)
Thickness: 60 to 72 um (2.4 to 2.8 mils)
Roll diameter: External 3” (maximum) with internal 1” core - with presenter
External 3” (maximum) with internal ½” core - without
presenter
External 6” (maximum) with internal 1” core
Thermal side is on the outside of the roll
Recommended paper brand: TF50KS-E made by NIPPON SEISHI or equivalent
AF50KS-E made by JUJOTHERMAL
KF50 made by KANZAN
P350 made by KSP
Chapter 2
Technical Specifications KF-6580