Bematech KC-1800 - Manual (Page 12)

User’s Manual
12
Figure 9
Figure 10
Figure 11
Paper Handling
Loading Paper
To insert a new paper roll, please do as follows:
The end of the paper roll must be
cut evenly, as shown on the right.
Be sure that the presenter is in the
locked position.
Place the spindle in the paper roll’s
core and then place the roll and
spindle in the paper holder as shown
in figure 10.
Note that the paper must go under
the damping device.
Gently push the paper into the paper
entrance. The printer will
automatically pull the paper,
perform a paper cut, and turn off the
Paper LED.