Bematech KC-1800 - Manual (Page 7)

7
KC-1800 · Revision 1.1
Chapter 2
Technical Specifications KC-1800 Technical Specifications KC-1800 Technical Specifications KC-1800 Technical Specifications KC-1800 Technical Specifications KC-1800
Characteristics
Printing Specifications
Method:
Thermal Line Printing
Dot Density: 8 dots/mm (203 dpi x 203 dpi)
Print Width: 72 mm (2.83”) (576 dot-positions)
Print Speed: 80 mm/s (3.15”/s) (text mode)
Characters per line: 24, 32, 48 and 64
Character Set: Alphanumeric Code Page 850, Code Page 858, Code
Page 860 and Code Page 437
Modular, flexible and lightweight design
Automatic cutter (full and partial cut)
Presenter with retractable function
High reliability
Low paper sensor (paper near end)
Automatic paper loading
Downloadable firmware – update your printer software on site
Supported Barcodes:
UPC-A, UPC-E, EAN13, EAN8, CODE 39, ITF, CODABAR,
CODE 93, CODE 128, ISBN, MSI, PLESSEY, PDF-417
Buffer Capacity: 32K Bytes
Interfaces: Parallel (Unidirectional) and Serial(RS-232) or USB (1.1)
Serial interface specification:
Baud rate: 9600 or 115200
Start bit:
1 bit
Data bits: 7 or 8 bits
Parity bit: odd / even or no parity
Stop bit: one or two bits
Voltage: 24 VDC ± 10%
Current: 2 A (4 A load, 1s max)
Operating temperature: 0 to +45ºC (+32 to +113°F)
Storage temperature:
-20 to +60ºC (-4 to +140°F) (except for paper)
Operating humidity: 35 to 80% RH, non condensing
Storage humidity: 10 to 90% RH, non condensing (except for paper)
Print head service life: 100 km, one hundred million pulses
Cutter lifetime:
500,000 cuts
Type: Single-ply thermal paper roll
Thickness: 67±5 um
Width: 79.0~80.0 mm (3.11~ 3.15”)
Roll diameter: External 8” (maximum) with internal 1” core. Please contact
your dealer for more details.
* Thermal side is on the outside of the roll
Recommended • TF50KS-E made by NIPPON SEISHI or equivalent
paper brand: • AF50KS-E made by JUJOTHERMAL
• KF50 made by KANZAN
• P350 made by KSP
Media
Features
Communication
Power Requirements
Environment
Reliability