Dolby Laboratories S01/13621 User Manual

Page 35

Advertising
background image

Dolby Installation Guidelines

Common Applications

5-3

Figure 5-3 Example Equipment Setup for use with Consoles with Full Monitoring Functions

Figure 5-3 shows a setup that uses separate program audio and monitor feeds. In this
setup, the console being used should feature the required monitoring functions.

5.2.2

Monitoring with a DP569 and DP562

If a DP570 is not available, it is possible to use a DP562 along with a DP569 and
DP563 to perform similar monitoring functions. The setup shown in Figure 5-4 shows
how this can be done. No external switching equipment is required, as either a serial
remote connection, a GPI/O connection, or the front panel can be used to control the
switching. However due to the coding delay of the Dolby Digital process, the latency
of this setup will be at least 211 ms and will change when switching between Dolby
Digital and Dolby Surround.

Advertising