Beurer TL 80 - Manual (Page 10)

10
General notes
Important
• If you are taking medication such as pain relievers, antihypertensives or antidepressants, consult
your doctor before using the daylight lamp.
• People with retinal diseases as well as diabetics need to be examined by an ophthalmologist before
beginning to use the daylight lamp.
• Please do not use if you have an eye disease such as cataracts, glaucoma, diseases of the optic
nerve in general and inflammation of the vitreous humour.
• If you have health concerns of any kind, contact your general practitioner!
• Before you use the unit for the first time, remove all packaging materials.
• The lamp tubes are excluded from the warranty.
Repairs
Important
• Do not open the device. Please do not attempt to repair the unit yourself. This could result in seri-
ous injuries. Failure to observe this regulation shall void the warranty.
• If you need to have the unit repaired, contact customer service or an authorised dealer.
4. Unit description
Overview
2.
9.
6.
1.
7.
3.
4.
5.
8.
1. Cover
2. Fluorescent screen
3. Tubes (2 x 36 Watt)
4. Rear of the device housing
5. Rear of the socket housing
6. Front of the socket housing
7. Stand
8. Mains cable with plug
9. On/Off button
5. Initial use
Setup
Take the device out of the plastic wrapping. Check the device for damage or faults. If you notice any
damage or faults on the device, do not use it and contact customer services or your supplier. Place the
device on flat surfaces. Select a location that leaves a distance of 20 to 60 cm between the unit and the
user. The lamp is most effective within this range.
Mains connection
Connect the unit only to the mains voltage listed on the type plate. Push the plug completely into the
mains socket.
Note:
• Ensure that there is a socket near the place where the lamp will stand.
• Lay the mains cable in such a way that no one can trip over it.