Replacing the lamp tubes/starter, Cleaning and care of the unit, Disposal – Beurer TL 80 User Manual

Page 12: Technical specifications

Advertising
background image

12

7. Replacing the lamp tubes/starter

The service life of the fluorescent tubes is on average 10,000 hours. If one tube needs replacing, both fluo-
rescent tubes must be replaced with new tubes of the same type. For this purpose, contact a retailer, an
authorised service centre or appropriately qualified personnel or contact the customer service.

The following tubes are approved as replacement:
• Philips – PL-L36W/865/4P
• The manufacturer’s tubes are available with the order number 162.942 from customer support

Warning

• For environmental reasons, do not dispose of the fluorescent tubes with the household waste. Dis-

pose of the unit at a suitable local collection or recycling point. Please contact the local authorities
responsible for waste disposal.

• Unplug the device, to avoid the risk of electrocution.
• Take care when handling fluorescent tubes to avoid the risk of cut injuries.

8. Cleaning and care of the unit

The unit should be cleaned occasionally.

Important

• Ensure that no water penetrates inside the unit!

Before you clean the unit, always switch it off, unplug it and let it cool off.

• Do not wash the unit in a washing machine!

Clean using a damp cloth, to which you can apply a little detergent if necessary.

• Do not touch the unit with wet hands while it is plugged in; do not allow any water to be sprayed

onto the unit. The unit must be operated only when it is completely dry.
Do not use abrasive detergents and never immerse the unit in water.

9. Disposal

In the interest of protecting the environment, the unit must not be thrown out with the household
waste at the end of its service life. Dispose of the unit at a suitable local collection or recycling
point.
Dispose of the device in accordance with EC Directive 2002/96/EC – WEEE (Waste Electrical and
Electronic Equipment). If you have any questions, please contact the local authorities responsible for wa-
ste disposal.

10. Technical specifications

Dimensions (WHD)

310 x 255 x 555 mm

Weight

2,7 kg

Lighting elements

FSL-YDW-36HRR

Power

72 watts

Light intensity

10,000 lux (15-20 cm)

Radiation

Output of radiation beyond the visible spectrum
(infrared and UV) is so low that it is harmless to
eyes and skin.

Product classification

Protection against moisture: IP20
Electrical protection class: class I

Mains connection

230 V ~, 50 Hz

Advertising