Beurer HTE 30 - Manual (Page 12)

12
5. Unit description
1 2 3
12
4 5 6 7 8
11
10
9
1 Plastic cap
2 Barrel with ceramic coating
3 Clip with ceramic coating
4 Lever for opening the clip
5 Temperature controller
6 Heat indicator lamp
7 Button to switch the device on/off 8 Handle
9 360° rotatable joint
10 Bend protection with hanging eyelet
11 Mains cable
12 Stand
6. Operation
Important
• Straighten the mains cable [11] if it becomes
twisted.
• Do not pull, twist or kink the mains cable [11];
do not pull or lay it across/on sharp, pointy
objects or hot surfaces.
• Do not clamp the mains cable [11], for examp-
le in drawers, doors or between the barrel [2]
and clip [3].
Warning
• Stand on a dry, electrically non-conductive
surface.
• Ensure that your hands are dry!
• Your hair must be dry!
• Depending on the temperature setting and
duration of use, the unit can become very hot.
If the unit is hot, touch it only by its handle [9]
– burn and fire hazard!
• Do not touch the plastic cap [1], the barrel [2]
or the clip [3].
• Press only on the lever [4] to open the clip [3].