Beurer HTE 30 - Manual (Page 14)

14
• You can shape the ends by twisting the cur-
ling iron either outward or inward before you
pull it out over the ends.
• Do not remain at any one place for longer
than about 8 to 10 seconds. This way you will
obtain the best results without overstraining or
damaging your hair.
Shaping curls/waves
• Place the hair strand ends between the barrel
[2] and the clip [3].
• Close the clip [3] to hold the hair strands in
place.
• Wind the strands toward your head on the
curling iron.
• Leave the curling iron in your hair for 8 to 10
seconds to achieve the desired curling results.
• Open the clip [3] and carefully pull the barrel
[2] out of the curl.
Note
• Automatic shutoff:
For your safety, the unit shuts off automati-
cally after 1 hour.
After use
• Press the button [7]. The heating element in
the curling iron is switched off.
• Place the curling iron with the stand [12] onto
a stable, horizontal and non-combustible
surface or hold the curling iron in your hand to
let it cool.
• Remove the plug from the socket after each
use.
• Do not wind the mains cable [11] around the
unit!
• Store the unit in a dry place that is out of
reach of children.
• The unit can be hung on a hook by the han-
ging eyelet [10].
7. Cleaning and care of the unit
Notes
• Your unit is maintenance-free.
• Protect the unit from dust, dirt and moisture.
Cleaning
Important
• Always remove the plug from the socket
before cleaning.
• Ensure that no water enters the inside of the
unit!
• Do not wash the unit in a dishwasher!
• Do not use any strong, sharp, abrasive, corro-
sive cleaning agents or hard brushes!
• Do not clean it with any highly flammable
liquids!
• The unit can be cleaned with a soft cloth that
has been moistened with warm water.