Beurer HTE 50 - Manual (Page 20)

20
Adjusting the temperature
You can set the temperature at two levels
using the slide switch [5]. We recommend the
following temperature settings:
Level Hair type
1: Low Fine, fragile, coloured or
bleached hair
2: High Normal and thick hair
Note
• The higher the selected temperature, the
more quickly you get the desired result.
• Select the desired temperature level via the
slide switch [5].
• The multi-function styler is ready for use in a
few minutes.
Shaping hair
Preparing hair
• Dry your hair completely before using the
multi-function styler.
• Your hair should be clean and free of styling
products.
• Comb your hair with a wide-toothed comb to
untangle it.
Shaping curls/waves
You can shape your hair with the curling irons
[A, B, C]:
• Divide your hair into individual strands with
a width of about 2 cm. Hold the strands taut.
• Press the lever of the curling iron to open
the curling tong.
• Place the hair strand ends between the
barrel and the curling tong of the curling
iron.
• Close the curling tong to hold the hair
strands in place.
• Wind the strands toward your head onto the
curling iron.
• Leave the curling iron in your hair for about
8 to 10 seconds. This way you will obtain
the best results without overstraining or
damaging your hair.
• Open the curling tong and carefully pull the
barrel out of the curl.
Shaping hair ends
• Place the hair strand ends between the
barrel and the curling tong of the curling
iron.
• Close the curling tong to hold the hair
strands in place.
• You can shape the ends by twisting the
curling iron either outward or inward before
you pull it out over the ends.