Beurer HTE 50 - Manual (Page 22)

22
• Press the lever of the curling iron [A] to
open the curling tong.
• Place the hair strand ends between the
barrel and the curling tong of the curling
iron [A].
• Close the curling tong to hold the hair
strands in place.
• Wind the strands toward your head around
the spiral attachment [D]. Always ensure
that the hair strands are wound up as
shown in the figure.
• Wait for about 10 seconds before you
unwind the hair strands again.
• Open the curling tong and pull the hair
strands out of the curling tong.
Using the straightening iron
• Attach the straightening/crimping
attachment [12] to the multi-function styler.
• Slide the selector switch [11] into the
"Straighten" position [a]. Now the
straightening iron [G] can be used.
• Divide your hair into individual strands with a
width of about 3 cm. Hold the strands taut
and place them between the straightening
iron [G] at the roots.
• Move the straightener slowly and smoothly
from the roots to the ends. Do not keep the
straightener at any one place for longer than
8 to 10 seconds. This way you will obtain
the best results without overstraining or
damaging your hair.
• You can shape the ends by twisting the
straightener either outward or inward before
you pull it out over the ends.
Straighten Closed Crimp