Datamax DGL - Manual (Page 48)

48
Appendix A
CUTTER Used to cut media into
separate labels.
ENABLED, *DISABLED, NOT
INSTALLED MEDIA CONTROL
→
Media
HandlingCut
SCANNER Used to check the bar codes
on the labels. VALIDATOR menu
GPIO PORT Model dependant option used
to interface the printer to an
external controlling device. GPIO CONTROL menu and
GPIO Manager
Table 3. Printer Options Menu
Datamax Setting Description PTX Setting
Table 4. System Settings Menu
Datamax Setting Description PTX Setting
CONFIGURATION FILE Options for storage and recall
of printer configuration files.
RESTORE AS CURRENT Provides a list of available
configuration files. Selecting a
file from the list causes a
printer reset; afterward, the
printer is configured
according to the activated file. CONFIG CONTROL
→
Load
Config
SAVE SETTING AS Saves the entire effective
configuration of the printer to
a file. CONFIG CONTROL
→
Save
Config
DELETE FILE Provides a list of available
configuration files to delete. CONFIG CONTROL
→
Delete Config
FACTORY SETTING FILE The selected file will be
restored whenever a Level 1
reset is performed. CONFIG CONTROL
→
Power-Up Config
INTERNAL MODULE Sets the number of 1K blocks
allocated for the internal RAM
‘D’ module.
*1024 KB N/A
DEFAULT MODULE Sets the default module used
to store files when no other
module is specified.*D PPI/DGL SETUP
→
Default
Module
*RAM, Flash