BUG-O Systems Programmable Shape Machine - Manual (Page 2)

2
SaFETY
PROTECT YOURSELF aNd OTHERS FROM SERIOUS INJURY OR dEaTH. KEEP CHILdREN
aWaY. BE SURE THaT aLL INSTaLLaTION, OPERaTION, MaINTENaNCE aNd REPaIR
PROCEdURES aRE PERFORMEd ONLY BY QUaLIFIEd INdIVIdUaLS.
EQUIPMENT daMaGE
POSSIBLE.
ELECTRIC SHOCK can kill.
1) The equipment is not waterproof. Using the
unit in a wet environment may result in
serious injury. Do not touch equipment when
wet or standing in a wet location.
2) The unused connectors have power on
them. Always keep the unused connectors
covered with the supplied protective panels.
Operation of the machine without the
protective panels may result in injury.
3) Never open the equipment without first
unplugging the power cord or serious injury
may result.
4) Verity the customer-supplied power connec-
tions are made in accordance with all
applicable local and national electrical safety
codes. If none exist, use International
Electric Code (IEC) 950.
5) Never remove or bypass the equipment
power cord ground. Verify the equipment is
grounded in accordance with all applicable
local and national electrical safety codes. If
none exist, use International Electric Code
(IEC) 950.
REad INSTRUCTIONS.
Read the instruction manual before installing and
using the equipment.
1) Do not plug in the power cord without first the
verifying the equipment is OFF and the cord
input voltage is the same as required by the
machine or serious damage may result.
2) Always verity both the pinion and wheels are
fully engaged before applying power or equip-
ment damage may occur.
3) Do not leave the equipment unattended.
Remove from the worksite and store in a safe
location when not in use.
1) Never try to stop the pinion from moving except
by removing power or by using the STOP
control.
2) Do not remove any protective panels, covers or
guards and operate equipment.
MOVING PaRTS can
cause serious injury.
FaLLING EQUIPMENT can
cause serious personal injury and
equipment damage.
Faulty or careless user installation is possible.
As a result, never stand or walk underneath
equipment.