7,9...........pendant controls, Pendant control – BUG-O Systems Programmable Shape Machine User Manual
Page 7
Advertising
7
PENdaNT CONTROL:
This is the Pendant Control with keypad and display, which plugs into the Pendant Control Connection on
the control panel.
aLPHa KEYS: Press Keys A, B, C, D, or E for the function desired, as described in the programming
section of this manual.
dIGIT KEYS: Use the digit keys to enter dimensions.
ENTER: Push the enter button to store the numeric value entered.
BaCKSPaCE: The backspace key removes the last digit keyed in before pushing the enter button, if a
correction is required.
Advertising