BUG-O Systems CB-2 - Manual (Page 26)

26
ACCESSORIES:
ITEM QTY PART NO. DESCRIPTION
1 1 CWO-3740 Manipulator Bracket / Weldment
2 1 CWO-3777 T-Handle, Knob 5/16-18 x .98"
3 1 CWO-4127 Locking Collar
4 1 CWO-4421 1/2-13 x 2-1/2" All Thread Rod
5 1 CWO-5551 Bracket / Mount Plate
6 1 CWO-5982 Oillite Thrust Bearing
7 2 FAS-0495 Set Scr 3/8-16 x 1/2"
8 8 FAS-1301 Hex Nut 1/2-13
9 12 WAS-0280 1/2" Washer
CWO-3744 MANIPULATOR BRACKET / EXPLODED VIEW / PARTS LIST
5
4
9
8
1
2
8
9
6
3
CWO-3744 Manipulator
Bracket
The Manipulator Bracket is
a mounting devise that was
designed to be used on
some Circle Welders and
Circle Burners. It attaches
to an existing fixture and
can be easily adjusted to
make sure that the Circle
Welder/Burner remains
square on the work piece.
7
CWO-3895 Hillside
Kit
T h e C W O - 3 8 9 5
Hillside Kit provides
a single rise and fall
motion per revolution
of the machine to
provide the motion
required to follow the
contour of an offset
pipe-to-pipe weld.
D u r i n g s t a n d a r d
operation, the cam
mechanism of all Bug-O Circle Welders provide dual
rise and fall action per revolution to follow the contour
of a pipe-to-pipe weld. Once the Hillside Kit is installed
on a Bug-O Circle Welder, the operator can easily
engage or disengage it to switch between single or
dual rise and fall operation.