BUG-O Systems CB-2 - Manual (Page 5)

5
INTRODUCTION:
The CB-2 (CBO-2000 & CBO-2002) Circle Burner uses oxy-fuel for square or beveled hole cuts using a
single cutting pass. The CB-2 is mounted on a special frame with a releasable permanent magnet base
specially designed for use on vessels and large diameter pipe.
The CB-3 (CBO-3000 & CBO-3002) Circle Burner also uses oxy-fuel for single pass, square or beveled
hole cuts. Mounted on a column and boom, manipulator or fixture, the CB-3 is designed for use on
vessels, large diameter pipe, domed heads and flat plate.
FEATURES:
• 1-1/2 h.p. P.M. Motor and rotational speed control
• Rotation speed of 0.1-2 r.p.m.
• 100% duty cycle
• Adjustable vertical and horizontal torch positioning system
• Rise and fall cam assembly with 7" (178 mm) of travel
• 2 hose machine torch w / tip adjuster, includes tips
• Cutting capacities: 1.5"-42" (38-1067 mm) bevel cut holes, 4"-48" (102-1219 mm) square
cut holes
• Brushes and collector rings for all controls, eliminates cable and hose wrap