Campomatic Chimney K Series - Manual (Page 11)

If Speed 3 is required，press key C adjust“＋”. At Speed 3 program both key
B and key C indication light will flash on each function key button.
To on the light press key E. To off the light press key E again.
When the appliance and light are ON together or separately, press key A the
Automatic Stop Timer will start the 15 minutes count down. Indication light
on the key A button will flash for the duration. To stop the Automatic Stop
Timer Function before 15 minutes time frame, press key A again.
 FUNCTION KEYS: (Fig.12, Fig.17)
A == Infrared Remote Control
B == Off
C == Speed 1/“－”Control
D == Speed 2/“＋”Control
E == Light
By pressing key C or D individually, the speed for each key will be the same
as above table. At the same time indication light will flash on the each
function key button. To stop the speed function press key B.
If Speed 3 is required，press key D and adjust“＋”. At Speed 3 program both
key C and key D indication light will flash on each function key button.
To on the light press key E. To off the light press key E again.
 FUNCTION KEYS: (Fig.13, Fig.18)
A == Infrared Remote Control
B == Automatic Stop Timer —15minutes
C == Speed 1/“－”Control
D == Speed 2/“＋”Control
E == Light
By pressing key C or D individually, the speed for each key will be the same
as above table. At the same time indicated light will flash on the each
function key buttons. To stop the speed function press key B. If using
Remote Control just press the“OFF”button
If Speed 3 is required，press key D and adjust“＋”. At Speed 3 program both
key C and key D indication light will flash on each function key button. If
Speed 4 function is available, when Speed 4 function is ON key C and D
indication light will flash. If using Remote Control press the “
”key.
To on the light press key E. To off the light press key E again.
When the appliance and light are ON together or separately, press key A the
Automatic Stop Timer will start the 15 minutes count down. Indication light
on the key A button will flash for the duration. To stop the Automatic Stop