Campomatic Chimney K Series User Manual

Page 5

Advertising
background image

Before connecting the model to the electricity network:

- control the data plate (positioned inside the appliance) to ascertain that the
voltage and power correspond to the network and the socket is suitable. If in
doubt please ask qualified electrician for help.

2. WARNING!
In certain circumstances electrical appliances may be a danger hazard.
A) Do not check the status of the filters while the cooker hood is operating
B) Do not touch bulbs or adjacent areas, after prolonged use of the lighting

installation.

C) Flambe cooking is prohibited underneath the cooker hood
D) Avoid free flame, as it is damaging the filters and can cause fire hazard
E) Constantly check food frying, the overheated oil may become a fire

hazard

F) Disconnect the electrical plug prior to any maintenance.
G) There shall be adequate ventilation in the room when the range hood is
operating
H) There is a risk of fire if cleaning is not carried out in accordance with the

instructions

I) If the supply cord is damaged, it must be replaced by the manufacturer or

its service agent or a similarly qualified person

J) This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.

K) Children should be supervised to ensure that they do not play with the

appliance.

L) The air must not be discharged into a flue that is used for exhausting

fumes from appliances burning gas or other fuels

M) The minimum distance between the supporting surface for the cooking

vessels on the hob and the lowest part of the range hood shall be at least
65cm. The instructions for installation of the gas hob specify a greater
distance has to be taken into account if requirement stated

O) Regulation concerning the discharge of air has to be fulfilled.

INSTALLATION INSTRUCTIONS

Assembly and electrical connections must be carried out by specialized

Advertising