Campomatic WM80K - Manual (Page 17)

17
* HAND WASH
Note
• If you want to change the setting during operation, press the Start/Pause button to hold the operation and
press the button you want.
• Only ‘Cold’ and ‘30’ ˚C washing temperatures are selectable with Hand Wash program.
• More than 1000rpm of spin velocity is not selectable with Hand Wash program.
• Only ‘Rinse+’ and ‘Crease Care’ wash options are selectable with Hand Wash program.
• Use Hand Wash program for the laundry that is marked ‘Hand wash’ in the care label.
• The appropriate amount of laundry for Hand Wash Program is below 2.0kg.
Put the laundry in the drum. Put detergent and softener into the detergent case. Then
close the door.
• Put detergent into the main wash and prewash compartments in the detergent
case. Softener should be below the ‘MAX’ level.
• Put detergent into the pre wash compartment only if you want to add prewash.
• When you want to use bleach, put it into the main wash compartment with
detergent.
Press the Power button.
• The LED shows only ‘---’ and all Program Lights turn on.
1
2
Select the ‘Hand Wash’ program using program selection dial.
• Washing temperature ‘Cold’, spin ‘400’ rpm and rinse ‘3’ times are selected
automatically.
• If you want to change the washing temperature, spin velocity or add wash options
(Rinse+, Crease Care), press each button.
3
Press Start/Pause button.
• The Door is locked. By sensing the weight of laundry and supplying wash water,
The appliance starts washing.
4