Caple WC6215 - Manual (Page 8)

8
1. Incline the wine cabinet 45 degrees, take out right lower hinge’s screws with screwdriver
(Fig.1)
2. Level the wine cabinet, hold the door and take out right upper hinge’s screws with
screwdriver. Then take out the door and rotate 180 degree (Fig.2 & Fig.3 & Fig.4)
3. Take off the decorated nail from left upper side and fit the door with screws .Then fit the
decorated nail to right side of A location. (see Fig.5& Fig.6)
¾
Installation specifications for built-in purposes