Caple WMF1020 - Manual (Page 18)

45
Start/pause button
a To start up the washing machine you
have to press the start / pause button.
The display will constantly show the
minutes left until the wash is over (on
display models).
7
STARTING UP AND
LOCK FUNCTION SELECTION
using the appliance
STARTING UP
Lock function selection
Available on display models.
The various buttons can be locked to prevent
them from being pressed and affecting the
selected wash programme and options. This
can be used to stop children playing with the
buttons, etc.
The lock function should be activated after
the wash programme has been selected
together with all its options.
Activating the lock function
a The lock function is activated by pressing
the start/pause button and holding it
down for at least 3 seconds.
The display will show if it is activated.
Deactivating the lock function
b The lock function is cancelled when the
wash programme comes to an end. If
you want to deactivate the lock function
before the end of the programme, you
have to hold the start button down again
for at least 3 seconds. After 3 seconds,
the lock function indicator will disappear
from the display, and it will go into pause
status.
The ON/OFF button does not cancel
the lock function.
LOCK FUNCTION
Start
/Pause
Start
/Pause
Start
/Pause