Caple WMF1020 - Manual (Page 22)

washing machine
safety and troubleshooting
49
Important
If you detect any problems with
your washing machine, you will
probably be able to rectify them
yourself by consulting the following
instructions.
If this is not the case, unplug the
appliance and contact the
TECHNICAL ASSISTANCE
SERVICE.
PROBLEMS
Never open up the
appliance. There is no fuse
or similar component inside
that can be replaced by the
user.
Why won’t the washing
machine start?
Why is the washing machine
vibrating or making too
much noise?
This may be due to the following:
The washing machine is not plugged into the mains or
there is no voltage in the mains supply.
The Start/Pause button has not been pressed.
When the washing machine door is not properly closed,
F04 appears on the display.
Check that the door has been closed properly.
This may be due to the following:
The blocking and transport screws have not been
removed.
The washing machine has not been correctly levelled.
During spin-drying the motor makes a “whistling” noise
which is normal due to the mechanical action of the
motor itself.
Indicator
FO1
FO2
CO3
FO4
FO5
.
.
.
.
.
F10
Problems
No water coming in
Does not drain or spin-dry
Does not spin-dry
Does not start
Call the Technical Assistance Service