Maintenance and cleaning, Cleaning the accessible filter and the outside – Caple WMF1020 User Manual

Page 21

Advertising
background image

48

Clean the accessible filter if the drain pump
is blocked by any foreign objects.

a Open the kickplate cover with the aid of

a coin and by pulling gently on it.

b Place a container under the drain pipe

to collect any water that comes out of
it.
Remove the drain pipe, place it on the
container and open the cover. Water will
start to come out.

c When all the water has come out of the

machine, turn the filter several times until
it can be completely removed, by pulling
gently on it.

d Remove the objects or fluff caught in the

filter or the drain pump.
Put the filter, the drain pipe and cover
back in place again.

CLEANING THE ACCESSIBLE FILTER AND
THE OUTSIDE

maintenance and cleaning

We recommend that you clean the filter
at least once a year.
To avoid burns, do not carry out this
operation when the wash water is at a
temperature of over 30ºC.

2

Important

CLEANING THE FILTER

The outside of the washing machine should
be cleaned with warm soapy water or a gentle
cleaning agent. Do not use abrasive cleaning
products or solvents.
It should then be thoroughly dried with a soft
cloth.

When there have been spillages of
detergent or additives from the
dispenser onto the washing machine
cabinet, clean them up right away as
they are corrosive.

Important

CLEANING THE OUTSIDE

Advertising