Caple CRG902SS - Manual (Page 15)

15
Fig. 3.9
Fig. 3.8
C
D
b) grill burner
– Unscrew and remove the burner
securing screw ‘C’ (fig. 3.8).
– Slacken screw ‘D’ (fig. 3.8).
– Move the burner in the manner shown
in figure 8.9.
Take care not to damage the wire to
the ignition electrode and the safety
valve probe.
– Using a 10 mm box spanner, unscrew
the injector (indicated by the arrow in
fig. 3.9) and replace with a new
injector selected in accordance with
the “TABLE FOR THE CHOICE OF
THE INJECTORS”; then replace the
burner repeating the above steps in
reverse order.