Caple CRG902SS - Manual (Page 30)

Replacing the oven light bulb
Switch the cooker off at the mains.
When the oven is cool unscrew and replace the bulb with another one resistant to high
temperatures (300°C), voltage 230 V (50 Hz), 15 W, E14.
Note: Oven bulb replacement is not covered by your guarantee.
Inside of oven
This must be cleaned regularly.
Remove and refit the side runner frames as described on the chapter “Assembly and
dismantling of the side runner frames”.
With the oven warm, wipe the inside walls with a cloth soaked in very hot soapy water
or another suitable product.
The bottom of the oven, side runner frames, tray and rack can be removed and washed.
Cleaning
All the enamelled parts must be cleaned with a sponge and soapy water or other non-
abrasive products.
Dry preferably with a soft cloth.
Acidic substances like lemon juice, tomato sauce, vinegar etc. can damage the enamel
if left too long.
Stainless steel surfaces
The stainless steel front panels on this cooker (facia, oven door, storage compartment)
are protected by a finger-print proof lacquer.
To avoid damaging this lacquer, do not clean the stainless steel with abrasive cleaners or
abrasive cloths or scouring pads.
ONLY SOAP/WARM WATER MUST BE USED TO CLEAN THE STAINLESS STEEL
SURFACES.
30