Function selector knob, Thermostat knob, Oven light – Caple CR9204 User Manual

Page 40: Traditional convection cooking, Traditional grilling

Advertising
background image

40

Function selector knob

(fig. 7.1)

Rotate the knob clockwise to set the oven for one of the following functions.

Thermostat knob

(fig. 7.2)

This only sets the cooking temperature and does not switch the oven on. Rotate clock-
wise until the required temperature is reached (

from 50 to 250°C).

The oven thermostat indicator light will illuminate when the oven is switched on and
turns off when the oven reaches the correct temperature.
The light will cycle on and off during cooking.

Oven light

By setting the knob to this position, only the oven light comes on.
It remains on in all the cooking modes.

Traditional convection cooking

The upper and lower heating elements come on.
The heat is dispersed by natural convection and the temperature must be set to

between 50° and 250°C via the thermostat knob. The oven must be preheated before
cooking.

In the

position the rotisserie motor come on for cooking with the rotisserie.

Recommended for:
Food that requires the same degree of cooking both inside and out, for example roasts,
spare pork ribs, meringues etc.

Traditional grilling

The infrared electrical resistance comes on.
The heat is diffused by radiation.
Use with the oven door closed and the thermostat knob to position 225°C for 15 min-
utes then to 175°C.

In the

position the rotisserie motor come on for cooking with the rotisserie.

For cooking hints, see the chapter “USE OF THE GRILL”.

Recommended for:
Intense grilling, browning, cooking au gratin and toasting etc.

It is recommended that you do not grill for longer than 30 minutes at any one
time.
Attention: the oven door becomes very hot during operation.

Keep children away.

Advertising
This manual is related to the following products: