Caple C3232 - Manual (Page 6)

6
Electrical connection
The appliance must be properly connected to the mains supply by a qualified
electrician according to current safety regulations.
This appliance must be earthed.
1. Lift up the cover (Figure 4).
2. Loosen the cable clamp (Figure 4).
3. Connect the mains supply cable to the terminal block on the cooker using the following
colour code (Figure 4):
• The yellow/green wire should be connected to the earth terminal.
• The blue or black wire should be connected to the neutral terminal.
• The brown or red wire should be connected to the live terminal.
Secure the cable clamp. Check the cable terminals for tightness and ensure that the terminal
links are in place, then close the cover over the terminal block.
Installing the oven
Place the oven into the housing unit and adjust its position until it is level, making sure it
aligns with any adjacent units, drawers, and cupboard doors (Figure 5).
When correctly positioned, drill the unit and secure the appliance in place with four fixing
screws (Figure 6).