Chase-Durer Blackhawk Mach 3 - Manual (Page 3)

WATCH OPERATION A-1
Setting Date
DIAL COMPONENTS
2
CROWN POSITIONS
Position 0 - Neutral
Position 1 - Setting Date / Alarm
Position 2 - Setting Time
1
2
3
31
60
40 20
9
6
3
0 0
9
8
7
6 5 4
3
2
1
ON OFFOFF
Minute Chrono Dial
Hour Hand
Minute Hand
Alarm Time
Chrono Sec Hand
Alarm
Off/On
(C)
Hour Chrono Dial
60 sec & 1/20 sec
Chrono Dial
Chrono Reset (B) 3 3
Date Window
0 1 2
Crown
Chrono (A)
2 2
Start/Stop 1 1
3
• Unscrew crown counter-clockwise (toward you) to position 0
• Pull crown out to position 1
•
Turn crown counter-clockwise* to set date
• Push crown in and screw-in until tight. (clockwise - away
from you)
* NOTE: By turning crown clockwise with crown in position 1,
the alarm hand will move. See “How To Use Alarm” section
WATCH OPERATION A-2
Setting Time
• Unscrew crown counter-clockwise (toward you) to position 0
• Pull crown out to position 2
• Turn crown to set hour and minute
• Push crown in while screwing-in clockwise. (away from you)
* NOTE: Do not set date between 9 p.m. to 1 a.m.