Cloud Electronics RL-1MB User Manual
Page 10
RL Series and RSL Series Installation Guide v2.0
10
NOTE:
It is possible to control two or more channels of a Cloud multi-
channel device “in parallel” from a single remote plate; this might be desirable
where, e.g., more than one channel of a mixer-amplifier is powering speakers in
the same zone, due to room size.
An RL-1 Series plate may be wired in parallel to more than one channel of an
amplifier or zoner, but note that the “law” of the control will differ from that
obeyed when it is used with a single channel. When wired to several channels
in parallel, this may produce an inconvenient “cramping” of the control’s
operation at one end of the range.
RSL-4 and RSL-6 Series remote control plates require modifications for multi-
channel operation. This topic is NOT covered in this manual. Installers requiring
this option should download the appropriate Cloud Technical Note from
, and carry out the modifications described before installing
the plates.