Codan Radio MT-4E Paging - Manual (Page 42)

USER GUIDE | MT-4E PAGING SYSTEMS
Chapter 3: MT-4E Paging System Components Page 34
TUNING AND MAINTENANCE TOOLS
To facilitate testing, alignment and maintenance for the MT-4E paging systems, extender cards can be
used to extend the individual modules out from the subrack. Extender kits (extender card plus a four-
foot cable) allow the modules to be extended out to a bench for servicing.
The following extender cards and kits are available:
EC-96D1 (direct connect) or EC-96K-1.22 (card and cable)
Used for the 96 pin CI-PM-3 paging modulator.
EC-48RD (direct connect) or EC-48RK-1.22 (card and cable)
Used for all receiver, transmitter, power amplifi er and system regulator modules.
Figure 3-24 shows the 96 pin and 48 pin direct connect extender cards.
Figure 3-24: EC-96D1 and EC-48RD Direct Connect Extender Cards
The A-TK-04 tool kit includes a number of spare parts for the MT-4E paging system, including tuning
tools, guide rails, transient suppressors, diodes, a fuse, dust caps, shunt jumpers, ESD wrist strap, and
various screws and hardware.