3 installation & system setup, Administrator guide – Code Blue 360-DEGREE PEDESTAL MOUNT PUBLIC ADDRESS SPEAKER User Manual

Page 8

Advertising
background image

Administrator Guide

Code Blue

This section covers the following units:

CB 1 Series with Public Address, including the 360° PAS Retrofit Kit

CB 5-s with Public Address

CB 2-e with Public Address

WM-180°

The following models are covered in the installation instructions for CB 1 Series with Public
Address or the 360° PAS Retrofit Kit:

CB 1-e

CB 1-s

CB 1-d

Ladder

– to reach the top of the unit.

Security bit

– to secure the PAS top to the adapter ring.

6mm Allen wrench

– to secure the PAS adapter ring to the top of the unit.

3/8

” socket set - to mount the mounting plate containing the new toroid transformer.

Remove 120V AC power from the unit.

3.1.2.1

3.1.3

Remove the existing dome top assembly. Disconnect the red/black and

3.1.3.1
yellow/yellow wiring harnesses connected to the beacon/strobe mounted in the
dome top assembly.

Place the adapter ring on top of the bollard and tighten the three Allen set

3.1.3.2
screws to hold in place (see

Figure 2

on Page 12).

Advertising
This manual is related to the following products: