Coloronix SCC1 - Manual (Page 10)

Triggering Scenes
RS232
RS232 Triggering
Make a cable using the 3 pins: TX, RX and G (GND)
Set the RS232 parameters to: 9600bds 8 bits, no Parity, 2 Stop bits
- To play a scene, send 3 bytes:
1 x 255 (x = scene number)
- To stop a scene, send 3 bytes: 2 x 255 (x = scene number)
- To pause a scene, send 3 bytes: 3 x 255 (x = scene number)
- To release a pause, send 3 bytes: 4 x 255 (x = scene number)
- To reset a scene, send 3 bytes: 5 x 255 (x = scene number)
Note: the scene number (x) can be from 1 to 40. For instance, 11 means Page B
Scene #3
Page 10 of 12 —Coloronix Color Pad Touch Manual V.2.0