Compuprint SP40 plus - Manual (Page 18)

User Manual
MAN10239-01 13
Connection to the Host
This printer can be connected to the host by means of the following available interface ports:
1. Parallel standard Centronics or bi-directional IEEE 1284 type interface
2. Serial RS-232/C interface
3. USB 2.0 full speed interface
4. Other optionally available ports (10/100T Wired LAN, USB 2.0 high speed, dual serial RS232/C)
Proceed as follows:
Make sure that both the host and the printer are turned off.
Identify the connector for the interface you want to plug and firmly insert the cable into it.
Fix the cable by means of the corresponding hooks or screws. on either side of the connector.
Parallel Interface Connection Serial Interface Connection
USB
Interface Connection