Comtech EF Data CDM-600/600L - Manual (Page 109)

CDM-600/600L Open Network Satellite Modem Revision 3
Front Panel Operation MN/CDM600L.IOM
5–33
5.6 SELECT: INFORMATION
INFO: ALL ID FORMAT TX RX CLOCKS EDMAC
DROP INSERT REMOTE ALARM-MASK MISC
The INFO screens provide information on the current configuration of the modem on a read-only
basis, without risking inadvertent changes.
Select All, ID, Mode, Tx, Rx, Clocks, EDMAC, Drop, Insert, Remote, Alarm-Mask, or Misc
using the [
←][→] arrow keys, then press [ENT].
5.6.1 INFO: ALL
ALL = START
(STOP, START)
The user may view the configuration of the unit, in a step-by-step process, by scrolling through
each display in succession. Use the [
↑][↓] arrow keys to select between Stop and Start. Press
[ENT] to continue through all the configurations.
Note that this display is read-only. The user may only view the configurations – no editing is
possible.
To discontinue: Press [CLR], use the [ ↑][↓] arrow keys to select Stop, then press [ENT].
5.6.2 INFO: ID
MODEM CIRCUIT ID:
----A TEST MESSAGE TO SHOW CIRCUIT ID---
This screen displays the user-defined Circuit ID string (40 characters), which is entered via the
menus: UTILITIES Æ EDIT-CIRCUIT-ID. Press [ENT] or [CLR] to return to the previous
menu.
5.6.3 INFO: MODE
INFO: MODE: TX= G.703B:D&I (B8ZS)
RX= G.703B:IBS (B8ZS)
An example of a Mode Information screen is shown above.