Appendix a. cable drawings, A.1 overview – Comtech EF Data CDM-625 User Manual
Page 451
A-1
Appendix A. CABLE DRAWINGS
A.1 Overview
The EIA-530 standard pinout that is provided on the CDM-625 is becoming more popular in many applications. However, there are still
many occasions – especially for existing EIA-422/449 and V.35 users – when a conversion is required. This appendix provides information
for the conversion cables needed for these situations:
• Figure A-1 depicts the cable required for EIA-530 -to- EIA-422/449 DCE conversion.
• Figure A-2 depicts the cable required for EIA-530 -to- V.35 DCE conversion.
• Figure A-3 depicts a standard EIA-232 cable for connection between the CDM-625 Rear Panel Remote Control port and any serial
port on the user PC.
All dimensions, where specified in the illustrations featured in this appendix, are in inches.