E.3.3.7 home > modem > block upconverter (buc), E.3.3.8 – Comtech EF Data CDM-625 User Manual

Page 561

Advertising
background image

CDM-625 Advanced Satellite Modem

Revision 15

Appendix E

MN-CDM625

E–33

E.3.3.7 Home > Modem > Block Upconverter (BUC)

Open the Block Upconverter (BUC) page from the Modem submenu. This page features a read-

only status section for the installed device and contains the following options:

Hot

Key Dialog Window

Option Entry

A

BUC DC Power

Use the ↑↓ arrow keys to select Disable or Enable

B

BUC 10 MHz Reference

Typical for either entry – Use the ↑↓ arrow keys to select Off or On

C

BUC RF Output

D

BUC Low Current Limit

Enter a low limit value from 0 to 4000 mA

E

BUC High Current Limit

Enter a high limit value from 0 to 4000 mA

F

BUC LO Frequency

Enter a value as follows:

Range 1 – From 0 to 0 MHz

Range 2 – From 3000 to 65000 MHz

G

BUC LO Mix

Use the ↑↓ arrow keys to select Low Side Mix or High Side Mix

H

BUC Address

Enter a value from 1 to 15

Press a hot key to open a dialog window. Otherwise, press [ESC] to return to the Modem

submenu.

Advertising