Comtech EF Data CDM-625 User Manual

Page 527

Advertising
background image

CDM-625 Advanced Satellite Modem

Revision 15

Appendix D

MN-CDM625

D–63

Parameter

Type

Command

(Instruction

& Qualifier)

Number of

Arguments

Description of Arguments

Response to

Command

Query

(Instruction &

Qualifier)

Response to

Query

Edit entry in

VLAN table

SVE=

8 bytes

Command only.

Edit VLAN table entry in the form aaaabcde, where:

aaaa = existing VLAN ID. Value range is 1-4095.

b = property of port 1;

0=Tagged, 1=Filtered, 2=Untagged

c = property of port 2;

0=Tagged, 1=Filtered, 2=Untagged

d = property of port 3;

0=Tagged, 1=Filtered, 2=Untagged

e = property of port 4;

0=Tagged, 1=Filtered, 2=Untagged

SVE=

SVE?

SVE*

SVE#

N/A

SVE=aaaabcde

(see Description of

Arguments)

Packet

Processor

Working Mode

WMD=

1 byte, value

0 thru 3

Command or Query.

Packet Processor Working Mode in the form x, where:

0 = Managed Switch

1 = Router Point to Point*

2 = Router Multipoint Hub*

3 = Router Multipoint Remote*

*Note: Settings 1 through 3 apply to modem only with IP Packet Processor option card installed and enabled.

WMD=

WMD?

WMD*

WMD#

WMD?

WMD=x

(see Description of

Arguments)

Dedicated

Management

Port

DMP=

1 byte, value

0 thru 8

Command or Query.

Dedicated Ethernet Management port in Redundancy system in the form x, where:

0 = Disabled (Any Ethernet port can do management, default value)

1 = Port 1

2 = Port 2

3 = Port 3

4 = Port 4

5 = Port 1 – Local only*

6 = Port 2 – Local only*

7 = Port 3 – Local only*

8 = Port 4 – Local only*

Notes:

1. VLAN must be Disabled to be able to select a port as Dedicated Management Port.

2. * Only LAN devices can access M&C of modem. NO remote modem access.

DMP=

DMP?

DMP*

DMP#

DMP?

DMP=x

(see Description of

Arguments)

Ethernet 2048

Frame Size

EFS=

1 byte, value

0 or 1

Command or Query.

2048 byte Ethernet Frame Size Enable/Disable in the form x, where:

0 = 2048 Ethernet Frame Size is Disabled

1 = 2048 Ethernet Frame Size is Enabled (supported by modem with baseboard hardware Rev2 and

above)

EFS=

EFS?

EFS*

EFS#

EFS?

EFS=x

(see Description of

Arguments)

Advertising