COWON iAUDIO 10 - Manual (Page 12)

12 iAUDIO 10
Firmware is software that is embedded within the
hardware. Upgrading it can enhance system stability
and provide additional features. Please be advised that
Beta (unofficial) firmware versions may cause system
malfunction.
How to upgrade the firmware
1. Download the latest firmware from the SUPPORT
section of the website (http://www.COWON.com).
2. Use the USB cable to connect iAUDIO 10 to the PC.
3. Unzip the downloaded firmware and copy it to the
root folder of iAUDIO 10.
4. Perform “Safely Remove Hardware” function on your
PC and disconnect the USB cable.
5. When you turn on the product, the firmware upgrade
process will start.
7. The current firmware version can be checked in
Settings System Information.
- Fully charge the player before upgrading the
firmware.
- Do not turn the player off before the firmware
update has been completed. It may damage the
product, and will void any warranty.
- Back up any important data before the firmware
upgrade as any data stored on the device may be
deleted during the process. COWON accepts no
liability for any loss of data.
+ Firmware Upgrade
Before you start!