COWON AD1 - Manual (Page 21)

21
Basic Use
More Functions
Other Information
Before You Start!
Before You Start!
Uninterruptible Power Equipment
+ When installing the uninterruptible power equipment, proceed
with the installation only after you have thoroughly reviewed the
included product manual.
+ The power cable must be fixed at the designated position.
(If the cable is not connected properly, reverse voltage may occur
and severe problems may arise in the product and the connected
black box.)
Yellow wire (BATT+)
To use, connect to permanent power fuse of the vehicle fuse box
(emergency light, interior lights, taillights, etc.)
Red wire (ACC+)
To use, connect to fuse that is supplied with power when vehicle
ignition is started and that is located in the vehicle fuse box
(cigarette lighter, stereo, etc.)
Black wire (GND)
Fix to bolt on metal area of frame
+ To install product, connect to fuse box in the vehicle to use.
+ In a high-temperature environment, this product will automatically stop recording to protect product functions.
+ When recording is automatically stopped, the Red/Blue LED will flicker repeatedly, and if the temperature
decreases, operation will automatically resume.
Black box power connecting
cable
Connect to black box power
terminal to supply power.