Cybex 18010 Bravo Press - Manual (Page 11)

11
Cybex Owner’s Manual
If Then
4. Verify weight stack pin is disengaged.
5. Remove spiral pin connecting pulley using a hammer and a 3/16” pin
punch.
Spiral
pin
6. Move pulley and cable connection out of the way
7. Remove guide rod caps. Guide rod cap contains a compression
spring that will fly if grasp is not released slowly. Slide spring loaded
guide rod cap down guide rod until cap is clear of frame. Slowly
release grasp of guide rod cap and remove.
8. Remove lifting post.
9. Remove weight plates.
10. Remove plastic insert plug, located at top of machine.
Plastic Insert
plug
11. Loosen the two button head socket cap screws (BHSCS) securing
handle bar to frame using a 7/32” Allen wrench.
BHSCS
Handle Bar