Cybex 18010 Bravo Press - Manual (Page 12)

12
Cybex Owner’s Manual
If Then
12. Hold threaded block in place with fingers and remove the BHSCS.
Do not let threaded block fall down in tube.
Threaded block
13. Remove BHSCS and locknuts, remove one side of mounting tube
using a 7/32” Allen wrench and a 9/16” wrench.
Mounting
Tube
14. Move machine to desired position.
15. Reattach frame halves and securely tighten the BHSCS and
locknuts.
16. Place two drops of Loctite ® 242 to each BHSCS and in thread
holes of threaded block for handle bar. Securely tighten BHSCS to
threaded block.
17. Insert plastic plugs.