Cybex 750C Cycle Bike - Manual (Page 10)

Cybex 750C/750R Cycle Owner’s Manual
10
Important Safety Instructions
(Save These Instructions)
DANGER: Death or serious injury can occur. To avoid death or injury the following
procedure must be followed. To reduce the risk of electrical shock, always
unplug unit from electrical outlet immediately after use and before cleaning.
WARNING: Serious injury or death can occur. To avoid injury or death the following
procedure must be followed. Follow precautions to reduce the risk of burns,
fires, electric shock or injury.
User Safety Precautions
• Obtain medical exam before beginning any exercise program.
WARNING: Serious injury or death can occur. To avoid injury or death the following
procedure must be followed.Heart rate monitoring systems may be
inaccurate. Over exercise may result in serious injury or death. If you feel
faint stop exercising immediately.
• Stop exercising if you feel faint, dizzy or experience pain and consult your physician.
• Obtain instruction before using. Lisez les instructions avant l’utilisation.
• Read and understand the Owner’s Manual and all warnings posted on the unit before using.
• Keep children away. Teenagers and disabled must be supervised. Tenez les enfants éloignés. Les
adolescents et les handicapés doevent être surveilles.
• Use caution when mounting and dismounting.
• Keep clear of moving parts. DO NOT wear loose or dangling clothing while using.
• DO NOT use the unit if you exceed 400 lbs (180 kg). This is the rated maximum user weight.
• Report any malfunctions, damage or repairs to the facility.
• Replace any warning labels if damaged, worn or illegible.
Facility Safety Precautions
It is the sole responsibility of the user/owner or facility operator to ensure that regular maintenance is
performed.
• Enforce all user and safety precautions.
• Read and understand the Owner’s Manual completely before assembling, servicing or using unit.
• Verify all users are properly trained on using the equipment.
• Do not use unit outdoors.
• Verify that each unit is setup, leveled and operated on a solid, level surface. Do not install
equipment on an uneven surface.