Cybex 750C Cycle Bike - Manual (Page 23)

Cybex 750C/750R Cycle Owner’s Manual
23
Attach the console assembly to base assembly.
If installing the A/V option, refer to the 750C A/V bracket installation instructions (supplied with the A/V
bracket).
1.
Locate the console assembly (#2) and four mounting screws 5/16-18 x .75” (#11). See
Figure 2.
#11
#1
Figure 2
#2
Display
Cable
Optional
A/V
Cable
2.
Hand thread two mounting screws 5/16-18 x .75” (#11) into the base assembly. See Figure 3.
#1
Figure 3
#11
#2
The console assembly (#2) will need to be supported during steps 3 through 6.
3. Carefully feed the display cable and optional A/V cable through the frame as shown in
Figure 2. Do not pinch or damage the cables during assembly.
4. Place the console assembly (#2) in the correct position on the base assembly (#1) by sliding
into position onto the two mounting screws 5/16-18 x .75” (#11). See Figure 3.