D.T. Systems SPT 2420 - Manual (Page 18)

• It is very important to periodically clean your
for maximum
performance. Regular cleaning will also lengthen the life
of your unit.
• Clean the collar box
with lukewarm water and a mild anti-bacterial soap.
• Take care to thoroughly clean the space between the
electrodes and the belt.
• The belt and buckle should be cleaned with water and a
mild soap then allowed to dry completely.
• Always allow the entire unit to completely dry before
using.
MAINTENANCE
18
PROGRAMMING THE COLLAR
Press and hold the Power button on the Collar Receiver.
You will see the LED light on the collar blink 7 times
before staying solid. You must hold down the power button
until the LED light becomes solid. Simultaneously press
and release the “NICK” and “STIMU.” buttons. In a few
seconds, you will see the LED light blink 3 times. The
collar ID is now programmed, and the collar receiver is
now ON.