Daktronics DF-2100 - Manual (Page 40)

32 DM-100 Controller
The following LCD prompt is shown for either Manual or Automatic dimming selections:
LCD Screen Action
INTENSITY XX ↓↑
ENTER TO SET
XX – Current intensity (1-16)
Max Intensity - 16
Press the up or down arrow key < ↑ ↓ > to
modify the current intensity of the display
(Note: The DataMaster must be connected to
the display)
Press [Enter] to accept this intensity. If the
manual-dimming mode is selected, this will be
the new intensity for the display. If the
automatic dimming mode is selected, the
display will illuminate in full-bright mode, which
is the maximum intensity level.
Update Display
Once connected to the display with a j-box, radio, or modem, press
[Update Display] to display the new sequence on the display. This button will also allow for
a preview of the new sequence on the LCD.