Daktronics Sportsound Rack SSR-300 Operation Manual - Manual (Page 15)

SSR-300 Components 9
Single-Muff Headset
The professional single-muff headset (Figure 11) may be used
in place of the standard announcer’s interface wired
microphone and headphones. Other features include:
 Ambient noise attenuation
 Neodymium magnet system for high reproduction
precision
 Soft, circumaural ear pads
 Cardioid condenser microphone
Self-Powered Monitor Speaker
The Yamaha MSP3 monitor speaker (Figure 12) features a compact bass
reflex cabinet, with a 3.94" (100 mm) two-way cone speaker and a 0.87"
(22 mm) dome speaker. Other features include:
 Three inputs: one ¼" phone, one RCA, one XLR
 Tone control (High/Low)
USB Audio Interface
The Radial ® Engineering USB-Pro™ (Figure 13) provides an interface
from various input types to balanced outputs. Other features include:
 24-bit, 96 kHz quality audio
 Two balanced XLR outputs (left and right)
 3.5mm TRS headphone output
 Ground lift and mono-sum switches
ADA-Hearing Assist System
The Listen ® LT-800 Stationary Transmitter allows individuals to
experience every word at an event. This system is designed to broadcast
the audio signal throughout the facility. It is capable of transmitting to
multiple receiver types and its adjustable receivers allow each user to
have full volume control.
The Listen LT-400 Portable FM Receiver (Figure 14) provides users with
the choice of 57 channels, a complete antenna, and accessory options
ideal for a wide range of applications. The receivers are digitally tuned so
transmission will not drift.
Figure 12: Self-
Powered Speaker
Figure 14: Portable FM
Receiver
Figure 11: Single-Muff Headset
Figure 13: USB
Audio Interface