Daktronics Gen V Radio User Manual
Page 14
8
Setting Radio Channels
Typically all multiple controller systems will use Broadcast Group 1 Channel 1 for the first
controller in Broadcast Group 1 and Broadcast Group 2 Channel 1 for the first controller in
Broadcast Group 2. All other consoles in a group are added sequentially, using channels 2-8
for groups 1 and 3, and channels 2-4 for groups 2 and 4.
Display
Action
The LCD will toggle between
these 2 screens.
The LCD shows the current radio settings along with a prompt
to accept or modify these values.
If the radio settings are correct press <ENTER>.
If these values are incorrect press <CLEAR>, and the LCD at
bottom left is shown, allowing edit of the channel or broadcast
group setting. Use the number keys to enter the desired
broadcast group and press <ENTER> to accept. The asterisk
will move to the channel setting.
Edit the channel number to the desired value and press
<ENTER>
to accept.
Broadcast
Group
Channel
Setting
Control Scoreboards
0
0
All Scoreboards
1
0
All in BCAST Group 1
1-8
Set to corresponding BCAST 1
Channel
2
0
All in BCAST Group 2
1-4
Set to Corresponding BCAST 2
Channel
3
0
All in BCAST Group 3
1-8
Set to corresponding BCAST 3
Channel
4
0
All in BCAST Group 4
1-4
Set to corresponding BCAST 4
Channel
ENTER TO ACCEPT
CLEAR TO MODI FY
BCAST GROUP 1*
RADI O CHAN 01
RADI O SETTI NGS
BCAST X CHAN YY