Datatek Upgrade/Backup/Reload User Manual

Page 11

Advertising
background image

U t i l i t i e s

03/08/07

11

configured a

vport

of

type=rcv

having an hport=50001. The command line syntax for the reload

utility would be:

reload –v –d –r –t50001 –bsamhost –slow –mUTM 192.168.0.234 test.db

Note the

–slow

flag. This parameter is necessary to slow the transfer because certain devices,

namely the UTM, UMI, IP-DSU, DT-2020, and DT-2020i, can only accept only one character at a time
on their serial interfaces until firmware updates can be made to these devices at some later time.
However, the database is quite small and there is little impact from this option for the reload
command.

WARNING: When using the –b option, the TCP numbers of 23 and 1023 may not be used on
the target devices as those indicate telnet consoles on the target devices. Any other TCP
value in the range of 1-65535 may be used. However, values lower than 1024 have been
reserved for specific functions by Internet Standards and should be avoided.

3.4 G

ETINFO

3.4.1 R

ELEASE

1.2 E

RRATA

Support has been added for the 4000XA. The 4000XA is a software conversion to a 4000 that gives it
the personality and the feature set of the 4180. The entire range of feature packages supported by
the 4180 is also supported by the 4000XA.

3.4.2 R

ELEASE

1.1 E

RRATA

This is the first official release of the utility. Changes from the Beta versions are as follows:

• The utility has a defined release number, and will no longer be issued quaterly.
• The problem associated with the beta version where a default “info” file is created without regard

to the master file name has been corrected. The “info” file follows the name of the master file.
This allows multiple groups of information to be collected simultanously.

3.5 D

EVREP

3.5.1 R

ELEASE

1.2 E

RRATA

Support has been added for the 4000XA. The 4000XA is a software conversion to a 4000 that gives it
the personality and the feature set of the 4180. The entire range of feature packages supported by
the 4180 is also supported by the 4000XA.

3.5.2 R

ELEASE

1.1 E

RRATA

This is the first official release of the utility. Changes from the Beta versions are as follows:

• The utility has a defined release number, and will no longer be issued quaterly.

Advertising